{"title":"Cato Fire Alarm Pull Station Covers","description":"\u003cp\u003eCato 220 series protective covers for fire alarm pull stations, moulded in red high density polypropylene. Surface or recessed mount, pull to open or secured with a break bar, with or without a gasket. They arrive fully assembled with hardware and anchors.\u003c\/p\u003e","products":[{"product_id":"cato-22012b","title":"22012B Cato 220 Series Fire Alarm Pull Station Cover, Surface Mount, Break Bar with gasket","description":"\u003cp\u003eThe Cato \u003cstrong\u003eALC22012B\u003c\/strong\u003e, ordered as 22012B and previously catalogued as the 220-SBX, is a protective cover for a surface mounted fire alarm pull station. It is moulded in high density polypropylene in red, arrives fully assembled and installs quickly with the supplied hardware and anchors. The security cover is vandal resistant: the scored acrylic panel is broken with a galvanized steel break bar, and a side slot holds the bar when it is not in use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCato model:\u003c\/strong\u003e ALC22012B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder number:\u003c\/strong\u003e 22012B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrior model:\u003c\/strong\u003e 220-SBX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm mounting:\u003c\/strong\u003e surface mounted alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening method:\u003c\/strong\u003e Security break bar with scored acrylic panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover inside dimensions:\u003c\/strong\u003e 6-1\/2\" W x 7-1\/2\" H x 3-1\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover outside dimensions:\u003c\/strong\u003e 7-1\/2\" W x 8-1\/4\" H x 3-3\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e injection moulded high density polypropylene, red only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel material:\u003c\/strong\u003e .080 acrylic, grid scored, clear only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreak tool:\u003c\/strong\u003e galvanized steel break bar on a clear nylon coated stainless steel cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e pull handle at the top, designed to ADA specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface mount detail:\u003c\/strong\u003e cut-outs top and bottom with a black nylon snap in dome plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecals:\u003c\/strong\u003e UV resistant BREAK PANEL and FIRE decals included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e mounting hardware and anchors included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse the surface mount version where the pull station is mounted directly on the wall face. Ordering the wrong one is the usual mistake: the two are not interchangeable.\u003c\/p\u003e\u003cp\u003eSold and shipped by FireSafetyProducts.us, Raleigh NC, an authorized Cato distributor. Cato is a trademark of Activar Construction Products Group.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eActivar warrants fire protection products other than extinguishers, including cabinets and alarm covers, free from defects in materials and workmanship for one year from date of shipment. Manufacturer warranty terms and conditions apply in all cases.\u003c\/small\u003e\u003c\/p\u003e","brand":"Cato","offers":[{"title":"Default Title","offer_id":54088260583619,"sku":"22012B","price":42.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/8658\/0931\/files\/220SSB-Security-alarm-cover-Cato.png?v=1790103096"},{"product_id":"cato-22001","title":"22001 Cato 220 Series Fire Alarm Pull Station Cover, Recessed Mount, Pull to Open","description":"\u003cp\u003eThe Cato \u003cstrong\u003eALC22001\u003c\/strong\u003e, ordered as 22001 and previously catalogued as the 220-R, is a protective cover for a recessed mounted fire alarm pull station. It is moulded in high density polypropylene in red, arrives fully assembled and installs quickly with the supplied hardware and anchors. The cover opens quickly in an emergency and stays open during inspection and maintenance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCato model:\u003c\/strong\u003e ALC22001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder number:\u003c\/strong\u003e 22001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrior model:\u003c\/strong\u003e 220-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm mounting:\u003c\/strong\u003e recessed mounted alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening method:\u003c\/strong\u003e Pull to open, unsecured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover inside dimensions:\u003c\/strong\u003e 6-1\/4\" W x 7-1\/4\" H x 1-3\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover outside dimensions:\u003c\/strong\u003e 7-1\/2\" W x 8-1\/4\" H x 2-1\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e injection moulded high density polypropylene, red only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover material:\u003c\/strong\u003e injection moulded copolymer polypropylene, clear only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e pull handle at the top, designed to ADA specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e not included - order the gasketed version for a weather or wash-down seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessed mount detail:\u003c\/strong\u003e for an alarm mounted inside a wall cut-out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecals:\u003c\/strong\u003e UV resistant PULL TO OPEN and FIRE decals included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e mounting hardware and anchors included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse the recessed mount version where the pull station is set inside a wall cut-out. Ordering the wrong one is the usual mistake: the two are not interchangeable.\u003c\/p\u003e\u003cp\u003eSold and shipped by FireSafetyProducts.us, Raleigh NC, an authorized Cato distributor. Cato is a trademark of Activar Construction Products Group.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eActivar warrants fire protection products other than extinguishers, including cabinets and alarm covers, free from defects in materials and workmanship for one year from date of shipment. Manufacturer warranty terms and conditions apply in all cases.\u003c\/small\u003e\u003c\/p\u003e","brand":"Cato","offers":[{"title":"Default Title","offer_id":54088262910147,"sku":"22001","price":28.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/8658\/0931\/files\/220S-Alarm-cover-pull-to-open-Cato-closed.png?v=1790103280"},{"product_id":"cato-22001c","title":"22001C Cato 220 Series Fire Alarm Pull Station Cover, Recessed Mount, Pull to Open with gasket","description":"\u003cp\u003eThe Cato \u003cstrong\u003eALC22001B\u003c\/strong\u003e, ordered as 22001C and previously catalogued as the 220-RX, is a protective cover for a recessed mounted fire alarm pull station. It is moulded in high density polypropylene in red, arrives fully assembled and installs quickly with the supplied hardware and anchors. The cover opens quickly in an emergency and stays open during inspection and maintenance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCato model:\u003c\/strong\u003e ALC22001B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder number:\u003c\/strong\u003e 22001C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrior model:\u003c\/strong\u003e 220-RX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm mounting:\u003c\/strong\u003e recessed mounted alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening method:\u003c\/strong\u003e Pull to open, unsecured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover inside dimensions:\u003c\/strong\u003e 6-1\/4\" W x 7-1\/4\" H x 1-3\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover outside dimensions:\u003c\/strong\u003e 7-1\/2\" W x 8-1\/4\" H x 2-1\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e injection moulded high density polypropylene, red only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover material:\u003c\/strong\u003e injection moulded copolymer polypropylene, clear only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e pull handle at the top, designed to ADA specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessed mount detail:\u003c\/strong\u003e for an alarm mounted inside a wall cut-out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecals:\u003c\/strong\u003e UV resistant PULL TO OPEN and FIRE decals included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e mounting hardware and anchors included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse the recessed mount version where the pull station is set inside a wall cut-out. Ordering the wrong one is the usual mistake: the two are not interchangeable.\u003c\/p\u003e\u003cp\u003eSold and shipped by FireSafetyProducts.us, Raleigh NC, an authorized Cato distributor. Cato is a trademark of Activar Construction Products Group.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eActivar warrants fire protection products other than extinguishers, including cabinets and alarm covers, free from defects in materials and workmanship for one year from date of shipment. Manufacturer warranty terms and conditions apply in all cases.\u003c\/small\u003e\u003c\/p\u003e","brand":"Cato","offers":[{"title":"Default Title","offer_id":54088263270595,"sku":"22001C","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/8658\/0931\/files\/220S-Alarm-cover-pull-to-open-Cato-closed_fb1e1cda-34ac-4f84-a043-43d1586f2eb7.png?v=1790103387"},{"product_id":"cato-22011","title":"22011 Cato 220 Series Fire Alarm Pull Station Cover, Surface Mount, Pull to Open","description":"\u003cp\u003eThe Cato \u003cstrong\u003eALC22011\u003c\/strong\u003e, ordered as 22011 and previously catalogued as the 220-S, is a protective cover for a surface mounted fire alarm pull station. It is moulded in high density polypropylene in red, arrives fully assembled and installs quickly with the supplied hardware and anchors. The cover opens quickly in an emergency and stays open during inspection and maintenance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCato model:\u003c\/strong\u003e ALC22011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder number:\u003c\/strong\u003e 22011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrior model:\u003c\/strong\u003e 220-S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm mounting:\u003c\/strong\u003e surface mounted alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening method:\u003c\/strong\u003e Pull to open, unsecured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover inside dimensions:\u003c\/strong\u003e 6-1\/2\" W x 7-1\/2\" H x 3-1\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover outside dimensions:\u003c\/strong\u003e 7-1\/2\" W x 8-1\/4\" H x 3-3\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e injection moulded high density polypropylene, red only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover material:\u003c\/strong\u003e injection moulded copolymer polypropylene, clear only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e pull handle at the top, designed to ADA specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e not included - order the gasketed version for a weather or wash-down seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface mount detail:\u003c\/strong\u003e cut-outs top and bottom with a black nylon snap in dome plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecals:\u003c\/strong\u003e UV resistant PULL TO OPEN and FIRE decals included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e mounting hardware and anchors included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse the surface mount version where the pull station is mounted directly on the wall face. Ordering the wrong one is the usual mistake: the two are not interchangeable.\u003c\/p\u003e\u003cp\u003eSold and shipped by FireSafetyProducts.us, Raleigh NC, an authorized Cato distributor. Cato is a trademark of Activar Construction Products Group.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eActivar warrants fire protection products other than extinguishers, including cabinets and alarm covers, free from defects in materials and workmanship for one year from date of shipment. Manufacturer warranty terms and conditions apply in all cases.\u003c\/small\u003e\u003c\/p\u003e","brand":"Cato","offers":[{"title":"Default Title","offer_id":54088263532739,"sku":"22011","price":31.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/8658\/0931\/files\/220S-Alarm-cover-pull-to-open-Cato-closed_52c82322-f6cf-4ac2-a6d6-194329ebbb00.png?v=1790103407"},{"product_id":"cato-22011b","title":"22011B Cato 220 Series Fire Alarm Pull Station Cover, Surface Mount, Pull to Open with gasket","description":"\u003cp\u003eThe Cato \u003cstrong\u003eALC22011B\u003c\/strong\u003e, ordered as 22011B and previously catalogued as the 220-SX, is a protective cover for a surface mounted fire alarm pull station. It is moulded in high density polypropylene in red, arrives fully assembled and installs quickly with the supplied hardware and anchors. The cover opens quickly in an emergency and stays open during inspection and maintenance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCato model:\u003c\/strong\u003e ALC22011B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder number:\u003c\/strong\u003e 22011B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrior model:\u003c\/strong\u003e 220-SX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm mounting:\u003c\/strong\u003e surface mounted alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening method:\u003c\/strong\u003e Pull to open, unsecured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover inside dimensions:\u003c\/strong\u003e 6-1\/2\" W x 7-1\/2\" H x 3-1\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover outside dimensions:\u003c\/strong\u003e 7-1\/2\" W x 8-1\/4\" H x 3-3\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e injection moulded high density polypropylene, red only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover material:\u003c\/strong\u003e injection moulded copolymer polypropylene, clear only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e pull handle at the top, designed to ADA specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface mount detail:\u003c\/strong\u003e cut-outs top and bottom with a black nylon snap in dome plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecals:\u003c\/strong\u003e UV resistant PULL TO OPEN and FIRE decals included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e mounting hardware and anchors included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse the surface mount version where the pull station is mounted directly on the wall face. Ordering the wrong one is the usual mistake: the two are not interchangeable.\u003c\/p\u003e\u003cp\u003eSold and shipped by FireSafetyProducts.us, Raleigh NC, an authorized Cato distributor. Cato is a trademark of Activar Construction Products Group.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eActivar warrants fire protection products other than extinguishers, including cabinets and alarm covers, free from defects in materials and workmanship for one year from date of shipment. Manufacturer warranty terms and conditions apply in all cases.\u003c\/small\u003e\u003c\/p\u003e","brand":"Cato","offers":[{"title":"Default Title","offer_id":54088263762115,"sku":"22011B","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/8658\/0931\/files\/31zgQP-JNvL.jpg?v=1790108327"},{"product_id":"cato-22002","title":"22002 Cato 220 Series Fire Alarm Pull Station Cover, Recessed Mount, Break Bar","description":"\u003cp\u003eThe Cato \u003cstrong\u003eALC22002\u003c\/strong\u003e, ordered as 22002 and previously catalogued as the 220-RB, is a protective cover for a recessed mounted fire alarm pull station. It is moulded in high density polypropylene in red, arrives fully assembled and installs quickly with the supplied hardware and anchors. The security cover is vandal resistant: the scored acrylic panel is broken with a galvanized steel break bar, and a side slot holds the bar when it is not in use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCato model:\u003c\/strong\u003e ALC22002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder number:\u003c\/strong\u003e 22002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrior model:\u003c\/strong\u003e 220-RB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm mounting:\u003c\/strong\u003e recessed mounted alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening method:\u003c\/strong\u003e Security break bar with scored acrylic panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover inside dimensions:\u003c\/strong\u003e 6-1\/4\" W x 7-1\/4\" H x 1-3\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover outside dimensions:\u003c\/strong\u003e 7-1\/2\" W x 8-1\/4\" H x 2-1\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e injection moulded high density polypropylene, red only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel material:\u003c\/strong\u003e .080 acrylic, grid scored, clear only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreak tool:\u003c\/strong\u003e galvanized steel break bar on a clear nylon coated stainless steel cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e pull handle at the top, designed to ADA specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e not included - order the gasketed version for a weather or wash-down seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessed mount detail:\u003c\/strong\u003e for an alarm mounted inside a wall cut-out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecals:\u003c\/strong\u003e UV resistant BREAK PANEL and FIRE decals included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e mounting hardware and anchors included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse the recessed mount version where the pull station is set inside a wall cut-out. Ordering the wrong one is the usual mistake: the two are not interchangeable.\u003c\/p\u003e\u003cp\u003eSold and shipped by FireSafetyProducts.us, Raleigh NC, an authorized Cato distributor. Cato is a trademark of Activar Construction Products Group.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eActivar warrants fire protection products other than extinguishers, including cabinets and alarm covers, free from defects in materials and workmanship for one year from date of shipment. Manufacturer warranty terms and conditions apply in all cases.\u003c\/small\u003e\u003c\/p\u003e","brand":"Cato","offers":[{"title":"Default Title","offer_id":54088263893187,"sku":"22002","price":37.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/8658\/0931\/files\/41EXO-QsloL.jpg?v=1790108327"},{"product_id":"cato-22012","title":"22012 Cato 220 Series Fire Alarm Pull Station Cover, Surface Mount, Break Bar","description":"\u003cp\u003eThe Cato \u003cstrong\u003eALC22012\u003c\/strong\u003e, ordered as 22012 and previously catalogued as the 220-SB, is a protective cover for a surface mounted fire alarm pull station. It is moulded in high density polypropylene in red, arrives fully assembled and installs quickly with the supplied hardware and anchors. The security cover is vandal resistant: the scored acrylic panel is broken with a galvanized steel break bar, and a side slot holds the bar when it is not in use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCato model:\u003c\/strong\u003e ALC22012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder number:\u003c\/strong\u003e 22012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrior model:\u003c\/strong\u003e 220-SB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm mounting:\u003c\/strong\u003e surface mounted alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening method:\u003c\/strong\u003e Security break bar with scored acrylic panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover inside dimensions:\u003c\/strong\u003e 6-1\/2\" W x 7-1\/2\" H x 3-1\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover outside dimensions:\u003c\/strong\u003e 7-1\/2\" W x 8-1\/4\" H x 3-3\/4\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.7 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e injection moulded high density polypropylene, red only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel material:\u003c\/strong\u003e .080 acrylic, grid scored, clear only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreak tool:\u003c\/strong\u003e galvanized steel break bar on a clear nylon coated stainless steel cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e pull handle at the top, designed to ADA specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e not included - order the gasketed version for a weather or wash-down seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface mount detail:\u003c\/strong\u003e cut-outs top and bottom with a black nylon snap in dome plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecals:\u003c\/strong\u003e UV resistant BREAK PANEL and FIRE decals included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e mounting hardware and anchors included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse the surface mount version where the pull station is mounted directly on the wall face. Ordering the wrong one is the usual mistake: the two are not interchangeable.\u003c\/p\u003e\u003cp\u003eSold and shipped by FireSafetyProducts.us, Raleigh NC, an authorized Cato distributor. Cato is a trademark of Activar Construction Products Group.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eActivar warrants fire protection products other than extinguishers, including cabinets and alarm covers, free from defects in materials and workmanship for one year from date of shipment. Manufacturer warranty terms and conditions apply in all cases.\u003c\/small\u003e\u003c\/p\u003e","brand":"Cato","offers":[{"title":"Default Title","offer_id":54088264515779,"sku":"22012","price":33.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/8658\/0931\/files\/220SSB-Security-alarm-cover-Cato_f12cb4f0-92bd-4bdb-a03c-eed24d2a6f5c.png?v=1790103473"}],"url":"https:\/\/www.firesafetyproducts.us\/collections\/cato-fire-alarm-pull-station-covers.oembed","provider":"FireSafetyProducts.us","version":"1.0","type":"link"}